dun code for windows

Hope this help you when you doing dun test

Error Number
Message
Description

600
An operation is pending
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

601
The port handle is invalid
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

602
The port is already open
Another application is using the port. Close the application and redial

603
The buffer is too small.
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

604
Wrong information specified.
The Remote Access Phone Book file and the current Remote access configuration are probably inconsistent. If you have changed your communications equipment (such as your serial port or modem), be sure to reconfigure Remote access. See Reconfiguring Dial-Up Networking

If the error persists, remove and recreate the affected Phone Book entry or , reinstall the Remote Access Service. The Remote Access Phonebook (rasphone.pbk) Is in the SYSTEM32/RAS subdirectory of your windows NT directory

605
Cannot set port information.
The Remote Access Phone Book file and the current Remote access configuration are probably inconsistent. If you have changed your communications equipment (such as your serial port or modem), be sure to reconfigure Remote access. See Reconfiguring Dial-Up Networking

If the error persists, remove and recreate the affected Phone Book entry or , reinstall the Remote Access Service. The Remote Access Phonebook (rasphone.pbk) Is in the SYSTEM32/RAS subdirectory of your windows NT directory

606
The port is not connected.
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

607
The event is invalid.
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

608
The device does not exist
The Remote Access Phone Book file and the current Remote access configuration are probably inconsistent. If you have changed your communications equipment (such as your serial port or modem), be sure to reconfigure Remote access. See Reconfiguring Dial-Up Networking

If the error persists, remove and recreate the affected Phone Book entry or, reinstall the Remote Access Service. The Remote Access Phonebook (rasphone.pbk) Is in the SYSTEM32/RAS subdirectory of your windows NT directory

609
The device does not exist
The Remote Access Phone Book file and the current Remote access configuration are probably inconsistent. If you have changed your communications equipment (such as your serial port or modem), be sure to reconfigure Remote access. See Reconfiguring Dial-Up Networking

If the error persists, remove and recreate the affected Phone Book entry or , reinstall the Remote Access Service. The Remote Access Phonebook (rasphone.pbk) Is in the SYSTEM32/RAS subdirectory of your windows NT directory

610
The buffer is invalid
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

611
The route is not available
Most likely, your network configuration is wrong. Restart your computer to make sure that all recent configuration changes have taken effect. If error persists, consult the Windows NT event log for detailed warnings or errors. Have customer record the fail code (a NetBIOS) error code

612
The route is not allocated
Most likely, your network configuration is wrong. Restart your computer to make sure that all recent configuration changes have taken effect. If error persists, consult the Windows NT event log for detailed warnings or errors. Have customer record the fail code (a NetBIOS) error code

613
Invalid compression specified
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

614
Our of butters
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

615
The port was not found
The Remote Access Phone Book file and the current Remote access configuration are probably inconsistent. If you have changed your communications equipment (such as your serial port or modem), be sure to reconfigure Remote access. See Reconfiguring Dial-Up Networking

If the error persists, remove and recreate the affected Phone Book entry or , reinstall the Remote Access Service. The Remote Access Phonebook (rasphone.pbk) Is in the SYSTEM32/RAS subdirectory of your windows NT directory

616
An asynchronous request is pending
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

617
The port or device is already disconnecting
Wait for Remote Access to Finnish disconnecting the entry or close the remote access Service

618
The port is open
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

619
The port is disconnected
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

620
There are no endpoints
Most likely, your network configuration is wrong. Restart your computer to make sure that all recent configuration changes have taken effect. If error persists, consult the Windows NT event log for detailed warnings or errors. Have customer record the fail code (a NetBIOS) error code

621
Cannot open the phone book file
The Remote Access Service uses the RASPHONE.PBK file in the \system32\RAS subdirectory of your Windows NT directory. Make sure the file is on this Path, and restart Remote Access

622
Cannot load the phone book file
The Remote Access Service uses the RASPHONE.PBK file in the \system32\RAS subdirectory of your Windows NT directory. Make sure the file is on this Path, and restart Remote Access

623
Cannot find the phone book entry
Remote Access has located the Phone Book but cannot find the specified entry. This error should not occur unless you are writing to Remote Access APIs, and have specified an incorrect entry name. The Remote Access Service uses the file RASPHONE.PBK, located in the \SYSTEM32\RAS subdirectory of your Windows NT directory

624
Cannot write the phone book entry
The Remote Access Service uses the RASPHONE.PBK file in the \system32\RAS subdirectory of your Windows NT directory. Make sure the file is on this Path, and restart Remote Access

625
Invalid information found in the phone book
The Remote Access Service uses the RASPHONE.PBK file in the \system32\RAS subdirectory of your Windows NT directory. Make sure the file is on this Path, and restart Remote Access

626
Cannot load a string
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

627
Cannot find key
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.

If you are using a modem that is not supported by Remote Access, Switch to a supported modem, or see Overview of Modem Script File for information about modifying the modem script file for your modem

628
The port was disconnected
Redial the entry. If you continue to get this message, reduce the modem’s initial speed, and turn off the advanced modem features. See Setting Modem Features. If the problem persists, contact your system administrator. If you’re dialing manually, make sure you’re connected before you click done

629
The port was disconnected by the remote machine
The link has been disconnected for one of the following reasons:

An unrecoverable phone line error
A noisy line
Disconnection by the system administrator
To re-establish the link, redial. You can enable automatic redialing through the User Preference Dialing tab. See Redial settings

If this error persists, lower the modem’s initial speed (bps) setting, and dial again. See Setting Modem Features

630
The port was disconnected due to hardware failure
The link has been disconnected for one of the following reasons:

An unrecoverable phone line error
A noisy line
Disconnection by the system administrator
To re-establish the link, redial. You can enable automatic redialing through the User Preference Dialing tab. See Redial settings

If this error persists, lower the modem’s initial speed (bps) setting, and dial again. See Setting Modem Features

631
The port was disconnected by the user
You have disconnected the line through an action on your computer. Redial

632
The structure size is incorrect
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

633
The port is already in use or is not configured for remote access dial out
If the port is already in use by another connection, hang up the connection on this port, or edit the entry to use another communication port

If the port is not already in use, reconfigure you remote access port for dial out. Ensure that the adapter/modem has been installed and the port has been added using the Control Panel Network option. See Reconfiguring Dialup Networking

634
Cannot register you computer on the remote network
The Remote Access server was unable to register your computer’s name on the network. Contact your system administrator

635
Unknown error
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

636
The wrong device is attached to the port
Your hardware configuration and the Remote Access setup are probably inconsistent with each other. If you have changed your communications equipment (such as serial port or modem), be sure to reconfigure Remote Access accordingly. See Reconfiguring Dial-Up Networking

637
The string could not be converted
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

638
The request has timed out
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

639
No asynchronous net available
Most likely, your network configuration is wrong. Restart your computer to make sure that all recent configuration changes have taken effect. If error persists, consult the Windows NT event log for detailed warnings or errors. Have customer record the fail code (a NetBIOS) error code

640
A NetBIOS error has occurred
Your modem may not have negotiated the connection correctly, or the line may be noisy. Set the modem to a lower initial speed (bps), and make it available to your technical support staff if you call for help

641
The server cannot allocate NetBIOS resources needed to support the client
Ask your system administrator to increase the resource capacity of the Remote Access server, or through the Services Control Panel stop nonessential services on your computer, such as messaging and network DDE

642
One of your NetBIOS names is already registered on the remote network
Networking architecture requires each computer on the network to be registered with a unique name. This rule applies to both the LAN and remote workstation.

To see if your computer has a unique name on the network, do the following:

Make sure your computer name is different from all other computer names on the network
To change your computer name, start the Network Control Panel, and select a new computer name.

If the name is not your computer name, another computer may have registered a computer name matching your domain name, or you are running a NetBIOS application that has added a conflicting name

If the problem persists after changing the name, contact your system administrator
NOTE

Because unique names are required, you cannot have both a Remote Access and a direct connection (such as Ethernet Connector) To the same network. If you are evaluating Remote Access in such a situation, you need to unplug the network connector before attempting to connect through Remote Access

643
A network adapter at the server failed
Report this error to your system administrator.

644
You will not receive network message popups
Another computer already connected to the network is using your messaging name. Messages addressed to you will be sent to that computer. If you want to receive messages at your remote workstation, you must remember to log off your office computer before you next dial in to the network.

Note

This error does not affect messaging through Microsoft Mail.

645
Internal authentication error
This error should not occur under normal circumstances. Restart you computer to make sure that all recent configuration changes have taken affect. If the error persists, consult the Windows NT event log of detailed warnings or errors

646
The account is not permitted to log on at this time of day
Your account has been configured for limited access to the network. If you need to access the network at a different time of day than what's presently configured, ask your system administrator to change the configuration.

647
The account is disabled
Ask your system administrator to enable your account.

648
The password has expired
If you are connecting through the Remote Access Phone Book, you will automatically be prompted to change your password.

If you are connecting through the RASDIAL command, you can change your password by doing the following:

Press CTRL+ALT+DEL.
Select Change Password, and follow the instructions on the screen.

649
The account does not have Remote Access permission
You have a valid account on the domain you selected, but your account does not have permission to access the network remotely. Ask your system administrator to give you dial-in permission.

If you have an account with dial-in permission on another domain, do the following to use your account on that domain:

Edit the Phone Book entry and clear the Authenticate using current user name and password check box.
Dial.
specify the appropriate user name, password, and domain.

650
The Remote Access Server is not responding
One of the following may have caused this error:

The Remote Access server is not running. Contact your system administrator to make sure the server is running.

The line may be too noisy. Lower the modem's initial speed (bps), and dial again. See Setting Modem Features.

Your modem may have failed to negotiate correctly with the Remote Access server's modem at the selected speed. Lower the modem's initial speed (bps), and dial again.

651
Your modem (or other connecting device) had reported an error
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.


652
Unrecognized response from the device
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.

653
A macro required by the device was not found in the device .INF file section
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.

654
A command or response in the device .INF file section refers to an undefined macro
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.


655
The macro was not found in the device .INF file section
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.


656
The macro in the device .INF file section contains an undefined macro
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.

657
The device .INF file could not be opened
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.


658
The device name in the device.INF or media.INI file is too long
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.

659
The media.INI file refers to an unknown device name
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.

660
The device.INF file contains no responses for the command
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.



661
The device.INF file is missing a command
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.



662
Attempted to set a macro not listed in device.INF file section
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.



663
The media.INI file refers to an unknown device type
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.


664
Cannot allocate memory
The system has run out of memory. Close some applications, and redial.

665
The port is not configured for Remote Access
665

If the port is already being used for another connection, hang up that connection, or edit this entry to use another communications port.

If the port is not already in use, reconfigure your Remote Access port for dialing out. For instructions, see Reconfiguring Dial-Up Networking.
666
Your modem (or other connecting device) is not responding for one of the following reasons:

The modem has been turned off.
The modem is not securely connected to your computer. Make sure your cable is securely fastened to both the modem and the computer.
The serial cable does not have the correct specifications required by Remote Access. See Cabling Requirements.
The modem has experienced a hardware glitch. Turn off the modem, wait for 20 seconds, and then restart the modem.

667
Cannot read the media.INI file
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.

668
The connection dropped
Redial the entry. If you continue to get this message, reduce the modem's initial speed, and turn off the advanced modem features. See Setting Modem Features. If the problem persists, contact your system administrator.

If you're dialing manually, make sure you're connected before you click Done.

669
The usage parameter in the media.INI file is invalid
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.



670
Cannot read the section name from the media.INI file
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.



671
Cannot read the device type from the media.INI file
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.



672
Cannot read the device name from the media.INI file
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.



673
Cannot read the usage from the media.INI file
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.
674
Cannot read the maximum connection BPS rate from the media.INI file
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.
675
Cannot read the maximum carrier BPS rate from the media.INI file
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall remote access.
If you are using a modem that is not supported by Remote Access, Switch to a supported modem, or see Overview of Modem Script File for information about modifying the modem script file for your modem
676
The line is busy
Redial the number. Automate redialing through the User Preferences Dialing tab. See Redial Settings

677
A person answered instead of a modem
A modem did not pick up the phone. Please check the number and dial again.

678
There is no answer
A modem did not pick up the phone. Please check the number and dial again.

679
Cannot detect carrier
A modem did not pick up the phone. Please check the number and dial again. Automate redialing through the User Preferences

Dialing tab. See Redial Settings

Note

Many modems return this error if the remote modem does not pick up the phone.

680
There is no dial tone
Make sure the phone line is plugged into the correct socket in the modem. Also, make sure you've added any special access numbers, such as the prefix 9 followed by a comma, to connect to an outside line. For example: 9,555-8181

681
General error reported by device
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall Remote Access.

The Remote Access script files (PAD.INF, MODEM.INF, and SWITCH.INF) are in the \SYSTEM32\RAS subdirectory of your Windows NT directory.

682
ERROR WRITING SECTIONNAME
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

683
ERROR WRITING DEVICETYPE
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

684
ERROR WRITING DEVICE NAME
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

685
ERROR WRITING MAXCONNECTBPS
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

686
ERROR WRITING MAXCARRIERBPS
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

687
ERROR WRITING USAGE
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

688
ERROR WRITING DEFAULTOFF
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

689
ERROR READING DEFAULTOFF
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

690
ERROR EMPTY INI FILE
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

691
Access denied because username and/or password is invalid on the domain
Type your user name, password, and domain. If you are unsure of this information, ask your system administrator.

If you do not specify a domain, the Remote Access server attempts to verify your user name and password on the domain of which it is a member.

692
Hardware failure in port or attached device
Your modem (or other connecting device) is not responding for one of the following reasons:

The modem has been turned off
The modem is not securely connected to your computer. Make sure your cable is securely fastened to both the modem and the computer.
The serial cable does not have the correct specifications required by Remote Access. See Cabling Requirements.
The modem has experienced a hardware glitch. Turn off the modem, wait for 20 seconds, and then restart it.

693
ERROR NOT BINARY MACRO
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall Remote Access.

If you are using a modem that is not supported by Remote Access, switch to a supported modem, or see Overview of Modem Script File for information about modifying the modem script file for your modem.

The Remote Access script files (PAD.INF, MODEM.INF, and SWITCH.INF) are in the \SYSTEM32\RAS subdirectory of your Windows NT directory.

694
ERROR DCB NOT FOUND
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

695
ERROR STATE MACHINES NOT STARTED
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

696
ERROR STATE MACHINES ALREADY STARTED
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

697
ERROR PARTIAL RESPONSE LOOPING
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

698
A response keyname in the device.INF file is not in the expected format
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall Remote Access.

If you are using a modem that is not supported by Remote Access, switch to a supported modem, or see Overview of Modem Script File for information about modifying the modem script file for your modem.

The Remote Access script files (PAD.INF, MODEM.INF, and SWITCH.INF) are in the \SYSTEM32\RAS subdirectory of your Windows NT directory.

699
The device response caused buffer overflow
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

700
The expanded command in the device.INF is too long
The limit for commands in the script file is 256 characters. Break up the command into multiple commands. See Commands.

701
The device moved to a BPS rate not supported by the COM driver
Your modem tried to connect at a speed that the serial port cannot interpret. Reset your initial speed to the next lowest standard bps rate: 38400, 19200, 9600, 2400.

702
Device response received when none expected
One of the Remote Access configuration files probably contains invalid information. The easiest way to resolve this problem is to reinstall Remote Access.

If you are using a modem that is not supported by Remote Access, switch to a supported modem, or see Overview of Modem Script File for information about modifying the modem script file for your modem.

The Remote Access script files (PAD.INF, MODEM.INF, and SWITCH.INF) are in the \SYSTEM32\RAS subdirectory of your Windows NT directory.

703
ERROR INTERACTIVE MODE
You can connect to entries that require Terminal mode only through the Remote Access Phone Book. This feature is not supported by RASDIAL or the Remote Access APIs.

704
ERROR BAD CALLBACK NUMBER
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.
705
ERROR INVALID AUTH STATE
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

706
ERROR WRITING INITBPS
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

707
X.25 diagnostic indication
Your X.25 connection has returned an error. Ask your X.25 provider to interpret the diagnostic information provided.

708
The account has expired
Ask your system administrator to reactivate your account.

709
Error changing password on domain
Try changing your password again. If you still get this message, report it to your system administrator.

710
Serial overrun errors were detected while communicating with your modem
Lower the modem's initial speed (bits per second), and redial. For instructions about lowering the initial speed, see "Setting Modem Features" in online Help.

711
RasMan initialization failure. Check the event log
This error should not occur under normal circumstances. Restart your computer to make sure that all recent configuration changes have taken effect. If the error persists, consult the Windows NT event log for detailed warnings or errors.

712
Biplex port is initialization. Wait a few seconds and redial
This error can occur on a port configured for dialing out and receiving calls (biplex port). It happens when you dial out at the same time the server is initializing the port for receiving calls. Remote Access solves this problem for you by redialing in a few seconds.

713
No active ISDN lines are available
Make sure that your ISDN line is plugged in correctly, make sure that the terminating resistors are installed correctly (see the documentation for your ISDN card), and then redial. If you still get this error, contact your ISDN card vendor Customer Service or your ISDN telephone company.

714
Not enough ISDN channels are available to make the call
All of the available ISDN channels are busy. Hang up one call and redial.

715
Too many errors occurred because of poor phone line quality
Too many asynchronous errors occurred on your phone line during authentication. Try again. If the problem persists, lower your baud rate and disable any modem features that may be set. See "Setting Modem Features" and "Modem Idiosyncrasies" in the Phone Book online help.

716
The Remote Access IP configuration is unusable
This error indicates a problem with the Remote Access TCP/IP configuration. User should reboot to ensure all configuration changes have taken effect.

717
No IP addresses are available in the static pool of Remote Access IP addresses
Try a specific IP address that will not cause a conflict on the remote network.

718
PPP timeout
A PPP conversation was started, but was terminated because the remote computer did not respond within an appropriate time. This can be caused by poor line quality or by a problem at the server.

719
PPP terminated by remote machine
A PPP conversation was started, but was terminated at the request of the remote machine. Most likely an error occurred on the server.

720
No PPP control protocols configured
Either there are no PPP network control protocols configured for the entry or the corresponding network protocol is not installed. This error may occur when the type of network protocols is changed during the product upgrade process. Correct the entry by checking the desired protocols in the PPP section of the Network Protocol Settings phonebook entry dialog box. If you intentionally cleared all protocols to force a downlevel RAS connection, this error indicates the NetBEUI protocol used for down-level connections is not installed.

721
Remote PPP peer is not responding
PPP was attempted but the remote computers did not respond. This error occurs when the server does not support PPP, such as a down-level Remote Access server or a SLIP server.

The NetBEUI protocol must be installed to communicate with down-level Remote Access servers. The SLIP protocol must be selected for the entry and the TCP/IP protocol installed to communicate with SLIP servers. For more information, see Network Protocol Settings.

This error may also occur if the server requires a terminal-style log on before starting PPP. If the server requires a terminal-style log on, you can choose to use a terminal window in the Dial-Up Networking Script tab.

If terminal log on solves the problem, you can automate the terminal login for future connections by activating an After-dialing script by selecting one in the Dial-Up Networking Script tab.

722
The PPP packet is invalid
A PPP packet was received that was not in a valid format.

723
The phone number, including prefix and suffix, is too long
The maximum length of the phone number, including prefix and suffix, is 128 characters.

724
The IPX protocol cannot dial-out on the port because the computer is an IPX router
This is a beta limitation that will be removed for final release.

725
The IPX protocol cannot dial-in on the port because the IPX router is not installed
This indicates an inconsistency in the Remote Access IPX configuration. Reboot to ensure all configuration changes have taken effect.

726
The IPX protocol cannot be used for dial-out on more than one port at a time
Only one port can be used to dial out using the IPX protocol.

727
Cannot access TCPCFG.DLL
The TCPCFG.DLL is a required TCP/IP component. Ensure TCP/IP is installed correctly.

728
Cannot find an IP adapter bound to Remote Access
This error indicates a problem with the Remote Access TCP/IP configuration. Reboot to ensure all configuration changes have taken effect.

729
SLIP cannot be used unless the IP protocol is installed
Install TCP/IP using Control Panel.

730
Computer registration is not complete
A request for information on the status of computer registration was made before the information was available.

731
The protocol is not configured
Specific information was requested on a PPP control protocol that is not configured.

732
The PPP negotiation is not converging
The negotiation of PPP parameters did not succeed because the local and remote computers could not agree on a common set of parameters.

733
The PPP control protocol for this network protocol is not available on the server
The server supports PPP but does not support the client network protocol.

734
The PPP link control protocol terminated
A PPP link control protocol conversation was started, but was terminated at the request of the remote computer. Most likely an error occurred on the server.

735
The requested address was rejected by the server
The client is configured to request a specific IP address. The server is not configured to permit clients requesting specific IP addresses or the specific IP address may already be in use by another client.

736
The remote computer terminated the control protocol
A PPP network control protocol conversation was started, but was terminated at the request of the remote computer. Most likely an error occurred on the server.

737
Loopback detected
The local and remote computers involved in the PPP conversation are the same computer. This usually means a device (for example, a modem) on the link is echoing characters back. Try resetting these devices.

For other vendor's servers, it may indicate that the remote computer is attempting a teletypewriter (TTY) login before connecting. Configure this entry for a post-connect Terminal.

738
The server did not assign an address
The server was unable to assign an IP address to the client from the pool of addresses allocated. Try a specific IP address on the client that will not cause a conflict on the remote network.

739
The remote server cannot use the windows NT encryption password
This error will occur only when making a PPP connection to non-Microsoft Windows NT servers. The standard PPP authentication protocols, used for interoperating with third-party servers, require the password to be available in clear-text form, but Windows NT stores only the encrypted form for security.

740
The TAPI devices configured for Remote Access failed to initialize or were not installed correctly
The TAPI devices configured for Remote Access failed to initialize or were not installed correctly. Remove Remote Access and the TAPI devices then reinstall Remote Access and the TAPI devices.

741
The local computer does not support encryption
The Require Data Encryption check box is selected but the RAS driver does not have encryption capability. Clear the check box to use unencrypted connections.

742
The remote server does not support encryption
The Require Data Encryption check box is selected but the RAS server does not support data encryption. Clear the check box to use unencrypted connections or contact your system administrator.

743
The remote server requires encryption
The remote RAS server requires data encryption check box is selected but the local RAS client does not have encryption capability.

744
Cannot use the IPX net number assigned by the remote server. Checking event log
The IPX network number assigned to the client by the RAS server for the WAN interface is already in use on the client's LAN.

Disconnect the client from the LAN, wait 3 minutes, and try again.

752
A syntax error was encountered while processing a script
The dial-up script associated with a phonebook entry contains a syntax error.

In Dial-Up Networking, edit the phonebook entry. In the Script tab, click
Edit scripts.

Thanks for that.

Closed and sticky'd.